Search
Close this search box.
CONSTANT FORCE SPRINGS
Constant Force Springs are usually manufactured as a pre-stressed flat strip material, tightly wound around a drum or shaft at the center and the hole at the free end is attached to a loading force, such as a balancing application.
CLIPS
Molds and tools are generally used in sheet form production. The molds and apparatus to be used are determined according to the type of material.
WIRE FORMING
Formed wires are designed in a wide variety of forms to fulfill many tasks.
COMPRESSION SPRINGS
Compression springs are used to store energy through compression, to provide a load (force) or to resist compressive forces.
EXTENSION SPRINGS
These springs, which resist pulling, are produced with adjacent windings, with exceptions.
TORSION SPRINGS
Torsion springs are generally used as actuating elements for shafts and work by rotating one of the spring arms around the spring body, which stores energy in the angular direction or in the direction of the spring.
Previous slide
Next slide

Products

COMPRESSION SPRINGS

Compression springs are used to store energy through compression, to provide a load (force) or to resist compressive forces. The most commonly used type is the one made of round wire, wound with closed ends, with two edges parallel to each other.

Details >

EXTENSION SPRINGS

These springs, which resist pulling, are produced with adjacent windings, with exceptions. The heat treatment applied to reach the maximum endurance limit in tension springs is of great importance for the reliability, life and performance of the material.

Details >

TORSION SPRINGS

Torsion springs are generally used as actuating elements for shafts and work by rotating one of the spring arms around the spring body, which stores energy in the angular direction or in the direction of the spring.

Details >

WIRE FORMING

Formed wires are designed in a wide variety of forms to fulfill many tasks. They are generally used in electrical devices and parts, machine equipment, as safety devices, as holders or stabilizers, as guides and locking devices in order to perform the targeted work with minimum deformation.

Details >

CLIPS

Molds and tools are generally used in sheet form production. The molds and apparatus to be used are determined according to the type of material.

Details >

CONSTANT FORCE SPRINGS

Constant Force Springs are usually manufactured as a pre-stressed flat strip material, tightly wound around a drum or shaft at the center and the hole at the free end is attached to a loading force, such as a balancing application.

Details >

Engineering

Our customers can contact us during the development phase of their projects/spring requirements for a more feasible, economical and reliable spring and clip design.

With the power of spring design software, Mast Yay is able to offer customers practical advice on spring designs by benefiting from the rich knowledge of our experienced workforce. This provides advantages for new designs and costs if done early in the development cycle. The same approach is applied when a customer presents us with a functional issue with an existing spring. Special solutions are produced for all your application needs.

To ensure trouble-free products, both technically and in terms of quality, we collaborate with our customers’ R&D departments. If requested, we participate in FMEA studies at our customers.

With the support we receive from our external suppliers to support our customers’ projects, planning and development products up to the final design stage

– Surface Treatment – Coating
– Heat Treatment
– Travoling
– Special Packaging
we offer a wide and versatile range of services.

Quality

Mast Yay is certified to ISO 9001 – ISO 14001 – ISO 45001 Quality Management Systems. Our aim is to provide excellent customer service that is environmentally and human sensitive by providing products and services that match or enhance our customers’ requirements and wishes.

Mast Yay is committed to supplying our customers with the highest quality parts available. It fulfills the requirements of IATF 16949 Automotive Quality Management System in PPAP presentation in new product commissioning and mass production conditions. Our quality control department has the latest testing equipment including SPC.

ABOUT US

logo300mastyay

Established in 2011, Mast Yay Endüstriyel Malzeme San.Tic.Ltd.Şti. is a company that follows the technology and developments in today’s spring industry and has adopted quality as a principle. 

With its expert team and wide machine park Mast Yay manufactures; springs, wire forms and clips for many sectors including white goods, electrical-electronics industry, automotive, heating-cooling and lighting and export to England, Germany, Netherlands, France, Portugal, Czechia, Brazil and China.

Read More >

SITE MAP

CONTACT

MAST YAY END. MALZ. SAN ve TİC. LTD. ŞTİ.

ATATÜRK ORGANİZE SANAYİ BÖLGESİ 10016 Sk. No:14 ÇİĞLİ – İZMİR / TÜRKİYE

+90 232 376 85 40
[email protected]

Facebook Linkedin Twitter Instagram Youtube